Product added to cart
NiteSite Viper - Scope Mounted Night Vision
The NiteSite Viper - Scope Mounted Night Vision is designed to be the most affordable, high quality night vision system on the market for short-range distances. It achieves this using a powerful infrared illuminator (invisible to people and animals) to literally illuminate the target area immediately in front of where the rifle scope is aiming, allowing clear target identification up to 100 metres (110 yards) away.
NiteSite Viper - Scope Mounted Night Vision
The NiteSite Viper - Scope Mounted Night Vision is designed to be the most affordable, high quality night vision system on the market for short-range distances.
It achieves this using a powerful infrared illuminator (invisible to people and animals) to literally illuminate the target area immediately in front of where the rifle scope is aiming, allowing clear target identification up to 100 metres (110 yards) away. The infrared image is then captured through the rifle scope by a compact digital camera unit attached to the scope’s eyepiece and then played back live to the hunter via the unit’s integral 3.5 inch LCD screen. A video out jack enables recording of all night hunting activities.
Like all NiteSite products, the Viper utilises infrared illumination in a unique way, making it more affordable, reliable and user friendly than traditional light amplification technologies, delivering crisp, ultra-clear night vision, regardless of ambient light conditions.
Quick and easy to fit to any day scope
The true beauty of a NiteSite is that it converts any day scope (there’s no need to remove it) into a powerful night vision system that is quick and simple to set up. Opening the carry case to hunt ready status takes just 60 seconds once you are familiar with the set up.
All NiteSites are equipped with adaptable fittings that enable mounting onto virtually any make and size of scope and there is no need to re zero or adjust your scope in any way.
Just mount the unit, switch on and you’re ready to shoot. Simple as that.
The Viper is available as standard with a small lightweight scope mounted 1.5Ah battery that delivers a run time of up to 7.5 hours.
Identification Range: 100 meters (110 Yards)
Usable Calibre: Any
Weight (excluding battery): 418g
Operational run time: Up to 7.5 hours
IR Frequency: 850nM
IR LED’s: 1
Display screen: 3.5 inch
Operating Temperature: -20° to 60° (-4°F to 140°F)
Video output: 3.5mm 4 pin jack
IR illuminator module
The scope mounted module houses three powerful (IR) illuminator delivering a range of up to 100m.
An ergonomic ‘dimming’ knob allows accurate control of the illumination power to reduce flare for closer range targeting.
The hooded front has an inset protective lens cover.
LCD viewing screen
Your IR illuminated targets are viewed through a high-resolution 3.5 inch LCD screen that delivers a clear black and white image of the view through the rifle scope.
Scope mounted lithium-ion battery pack To prevent the illuminator moving out of the mount the anti-recoil clamp holds the unit firmly and securely to the “T” mount in conjunction with the scope clamp.
Scope mounted lithium-ion battery pack The scope clamp is used to attach the illuminator module to the rifle scope body tube.
Its flexible construction allows easy clip on attachment to the scope.
A rubber sleeve provides a secure, stable connection from the scope’s ocular to the camera unit.
The heavy-duty rubber construction is flexible enough to stretch over most rifle scope eyepieces.
Digital IR camera module
Scope mounted lithium-ion battery pack The rugged module houses an infrared (IR) frequency camera with audio and video (AV) output allowing external connection to a recording device via a 3.5mm four pin socket.
A large push button on/off switch is located on the rear face of the module for easy night operation.
Scope mounted lithium-ion battery pack
The 1.5Ah lithium-ion polymer scope mounted battery provides 7.5 hours operating time and has an adjustable Velcro strap for easy fastening to your rifle scope.
Included in the box
Heavy duty field carry case
1 x Carry Case. A robust carry case, fully padded with laser cut high-density ergonomic foam, makes transporting easy and ensures all components are held firmly and are heavily protected from the inevitable knocks the case will endure in the field. Large clasps make unlocking the case easy in night vision conditions.
Illuminator module and viewing screen
1 x Illuminator module. The scope mounted module houses 1 powerful (IR) illuminator delivering a range of up to 100m. An ergonomic ‘dimming’ knob allows accurate control of the illumination power to reduce flare for closer range targeting. The hooded front has an inset protective lens cover. The rear of the module features a 3.5 inch LCD viewing screen.
Connection to the camera unit is via a 90 degree male three pin jack plug and cable. The base features a patented ‘T’ bracket that connects securely to the Anti recoil clamps ‘T’ slot.
Digital IR camera module
1 x Camera module. The rugged module houses a colour infrared (IR) frequency camera 1.0 Lux 600TVL 1/3 CCD CMOS sensor (PAL or NTSC) 4:3 ratio. Audio and video (AV) output allows external connection to a recording device via a 3.5mm four pin socket (PAL or NTSC depending on your region). A large push button on/off switch is located on the rear face of the module for easy night operation.
1 x battery. The Viper is supplied with a 1.5Ah lithium-ion polymer scope mounted battery with adjustable Velcro fastening.
1 x 12 volt lithium-ion charger with charging indicator. Red light indicates the battery is charging. The green light indicates the battery is fully charged. Always use the correct charger supplied with the NiteSite battery product.
Multi diameter scope sleeves
2 x scope sleeves. 35mm or 40mm diameter rubber sleeves provide a secure, stable connection from the scope’s ocular to the camera unit. The heavy duty rubber construction is flexible enough to stretch over most rifle scope eyepieces although the first application of the scope sleeve over larger diameter eyepieces (44mm plus) can be assisted by softening the sleeve in hot water.
Multi diameter scope clamps
2 x scope clamps. 25mm and 30mm diameter clamps are included enabling mounting to most rifle scope body tubes. Larger scope clamp sizes are also available in 32mm and 34mm for bigger diameter scope body tubes.
1 x adjustable anti-recoil clamp. The removable plastic clamp connects to the top of the scope clamp and ensures that the illuminator module stays firmly in the ‘T’ slot even during the most powerful recoil actions.
1 x pack of five filters. Adhesive screen filters reduce screen glare to suit your environment and personal preferences. Multiple anti-glare filters can be used, progressively darkening the screen with each filter applied.
Instruction booklet and 2 year warranty card
1 x Instruction booklet. Designed to help you get the most from your NiteSite. It covers all aspects of set up, operation and care of your equipment.
1 x 24 month guarantee card. Covers you against electrical and mechanical breakdown. Note: Battery packs are guaranteed for 12 months.
|Current Stock Availability||Please check stock prior to purchase|
|Brand||NiteSite Night Vision Riflescopes|
Write Your Own Review
E&OE Notice | Stock Availability, Pricing and Product Information
While we strive to provide accurate product and pricing information, unintentional pricing or typographical errors may occur. We reserve the right to correct any errors, inaccuracies or omissions and to change or update information (including, without limitation, images, information related to text, pricing, availability, product descriptions, and package contents) at any time without notice (Including: after you submitted your order; confirmation was received, and payment has been made). In the event that an item is listed at an incorrect price or with incorrect information, we shall have the right, in our sole discretion, to refuse and cancel any orders. Canceled orders already paid for will be refunded to you in full.